Power your Mark 2 with a portable power station

There are four popular power stations that can power your portable AC: EcoFlow, Goal Zero and BLUETTI. EcoFlow, Goal Zero and BLUETTI are three brand power stations that support DC power, which can charge Mark 2. In this article, we will talk about how to charge Mark 2 with these three brands' power stations.

To power your air conditioner with a power station, the first thing you need to check is that your power station provides the same voltage as your air conditioner. If not, you will need a power converter. For example, if the power station output is 12V and your air conditioner input is 24V, then you need a 12V to 24V converter. Using a converter will simply reduce energy loss during the process, better than using an AC adapter.

The next thing is to check if the interfaces are the same. ZERO BREEZE Mark 2 provides a 12V to 24V converter with two available connectors. One is a 12V car cigarette interface, and the other is a 12V wire. Keep in mind that the 12V car cigarette interface is only supported to charge Mark 2 batteries. It cannot run Mark 2 directly.

However, if you want to charge Mark 2 with a power station, you need an extra connector.

12V/25A cable for BLUETTI AC200MAX/ AC200P

Different brands of power stations have different ports. Here, we made specific connection cables to fit your power stations. A side with black and red cubes is called the Anderson port. Anderson port is connected to portable power stations. Another side is XT 60, which couples with the 12V to 24V converter. Since different portable power stations have their own Anderson ports, we have pre-set Anderson port connectors for them. BLUETTI has its own particular port, and we made one specifically for BLUETTI as well.